♦ Earthquake Engineering Program

1. Program Outline

This Earthquake Engineering Program (EEP) is aiming to produce highly skilled engineers and researchers who make significant contributions to earthquake hazard mitigation world-wide. The program is offered by the Center for Urban Earthquake Engineering (CUEE), Tokyo Institute of Technology.

2. Departments and Faculty

A student enrolled in this program belongs to one of the following five departments and is supervised by the professors engaged in the program.

(1) Dept. of Architecture and Building Engineering

(2) Dept. of Civil Engineering

(3) Dept. of Built Environment

(4) Dept. of Environmental Science and Technology

(5) Dept. of Mechanical and Environmental Informatics

3. Guide to Study in Earthquake Engineering Program

Earthquake Engineering Program is designed in the scheme of ‘Integrated Doctoral Education Program’ in which the Master’s program is combined with the Doctoral program. Thus, all students in EEP, including Master’s degree recipients at other universities, must start with the Master’s program and are to study for both Master’s and Doctoral degrees.

To acquire the degrees, students in EEP must satisfy several requirements as follows.

Master’s degree
For a Master’s degree a student must take 30 credits or more and meet other requirements as follows:

Doctoral degree
For a Doctoral degree a doctoral candidate must satisfy the following requirements:

4. Tables of Course Subjects

All lectures offered in this program are given in English. The course subjects provided by EEP are given in the following table. Please note that the subjects might be subject to change.

* BE: Dept. Built Environment, EST: Dept. Environmental Science and Technology, ABE: Dept. Architecture and Builidng Environment, CEE: Dept. Civil and Environmental Engineering, MEI: Dept. Mechanical and Environmental Informatics, IDE: Dept. International Development Engineering

** 0: Basic and Common subject, I: Seismology and Geotechnical Engineering, II: Structural Engineering,
III: Disaster Risk management, IV: International Practice, V: Research Projects,
C: Compulsory for the student who belongs to the department offering the particular course.

*** I, II: 1st year in Master’s course; III, IV: 2nd year in Master’s course;
V, VI; 1st year in Doctoral course; VII, VIII; 2nd year in Doctoral course;
IX, X; 3rd year in Doctoral course; even: spring semester, odd: autumn semester.

5. Syllabi of Course Subjects

92084
Dynamics of Structures
Spring Semester (2-0-0) (Every Year)
Prof. Kazuhiko KASAI and Assistant Prof. Troy A. MORGAN
[Scope and outline]
This course addresses several introductory and intermediate topics in dynamic behavior of structural systems. The student is expected to have taken introductory coursework in linear algebra and differential equations. Main focus is on the evaluation of deformations and forces in structures due to dynamic forces. Structures are idealized as single-degree of freedom (SDOF) or discrete-parameter multi-degree of freedom (MDOF) systems. Special attention is given to seismic topics including linear earthquake response history analysis and estimation of maximum response by response spectrum analysis.

Topics include:

1. Free vibration of SDOF systems
2. Response of SDOF systems to forced vibration
3. Numerical integration
4. Elastic earthquake response spectrum analysis
5. Dynamic behavior of MDOF systems

92046
Earthquake and Tsunami Disaster Reduction
Autumn Semester (1-0-0) (Every Year)
Prof. Hiroaki YAMANAKA, Assoc. Prof. Hitoshi MORIKAWA, Assoc. Prof. Akihiro TAKAHASHI, Assoc. Prof. Satoshi YAMADA, Prof. Shigeo TAKAHASHI
[Scope and outline]
To mitigate the earthquake and tsunami disaster, it is important to know them. This course is devoted to make the lecture with respect to the basics of earthquake and tsunami disaster and their mitigation. This course is a distance-learning class through the Internet and delivered to National Central University, Taiwan, Chulalongkorn University, Thailand, and Universiti Sains Malaysia, Malaysia. This course includes 10-week lectures and students will be graded by their reports.

The topics of this class are follows:

1. Earthquake Disaster
2. Earthquake and Earthquake Ground Motion
3. Seismic Risk Assessment
4. Modeling Ground Structure
5. Earthquake Geo-Hazard
6. Mitigation of Earthquake Geo-Hazard
7. Basis of Earthquake Resistant Design of Building Structure
8. Controlling Seismic Response of Building Structure
9. Tsunami Disaster
10. Tsunami Hazard Mitigation

92008
Basics and Applications of Stochastic Processes
Spring Semester (1-1-0) (Every Year)
Assoc. Prof. Hitoshi MORIKAWA
[Scope and outline]
This course discusses the basic theory of probability and stochastic process with some applications to the earthquake engineering. As the applications, techniques of analysis for array observation data of microtremors are dealt with: that is, spatial auto-correlation (SPAC) method and so on. The students are encouraged to study with the course “Introduction to Time-Frequency Analysis”. To understand the theory, students will be required to finish a project including programming and numerical calculation. The grading policy is based on the project and its presentation.

92033
Strong Motion Prediction
Spring Semester (1-0-0) (Every Year)
Prof. Saburoh MIDORIKAWA
[Scope and outline]
The subject aims to introduce methodologies for strong motion prediction by which the design earthquake motion for seismic design of structures is specified. Topics dealt in this course include

1. Observation of strong ground motion
2. Local site effects on ground motion
3. Empirical prediction methods
4. Theoretical and Semi-empirical prediction methods
5. Seismic hazard maps

92038
Passive Control of Structure against Earthquakes
Autumn Semester (1-0-0) (Every Year)
Prof. Kazuhiko KASAI
[Scope and outline]
This course discusses various methods to evaluate effectiveness of the passive control dampers and building framing schemes. Characteristics of four main types of dampers are explained. Design and analytical methods for three types of framing systems having distinct architectural features, damper connecting schemes, as well as control efficiencies are explained. Topics are as follows:

1. Fundamental Theory on Passive Control
2. Mechanical Characteristics of Dampers
3. Framing Systems and Their Control Efficiencies
4. Analytical Methods for Passive Control Dampers and Systems
5. Design Methods for Passive Control Dampers and Systems

92023
Analysis and Design of Structures Considering Material Nonlinearity
Spring Semester (2-0-0) (Every Year)
Prof. Kazuhiko Kasai
[Scope and outline]
This course discusses nonlinear force-deformation characteristics of structural members/materials and their effects on performance of the structural systems. Various static and dynamic analysis methods will be presented. Homework assignments provide extensive hands-on experience of the analytical methods, and they are designed to cultivate students’ physical understanding of the nonlinear behavior. Topics are as follows:

1. Review of Linear Matrix Structural Analysis Methods.
2. Nonlinear Analysis Strategies for Truss Systems.
3. Nonlinear Beam Elements.
4. Nonlinear Analysis Strategies for Frames with Beam Elements.
5. Nonlinear Dynamic Analysis Methods.
6. Linear Analysis Using Finite Elements (may replace Chap. 5).

92043
Advanced Analysis and Design of Structures Considering Geometrical & Material Nonlinearities
Autumn Semester (1-0-0) (Odd Years)
Prof. Shojiro MOTOYUI
[Scope and outline]
This course discusses analytical methods to simulate collapse behavior of building structures. Particularly, it presents treatment of both geometrical nonlinearity and complex material nonlinearity which are essential in these analytical methods.

1. Formulation of Geometrical Nonlinearity with finite rotation
2. Co-rotational Beam Element including Geometrical Nonlinearity

92035
City/Transport Planning and the Environment
Autumn Semester (1-0-0) (Every Year)
Assoc. Prof. Yasunori MUROMACHI
[Scope]
Following introduction, this course focuses on air pollution, global warming, noise and other elements of the environment which city/transport planning should cover. Theoretical issues such as externality and public goods as well as practical concerns such as EIA are also discussed.
[Outline]

1. Air Pollution
2. Global Warming
3. Noise
4. Other Elements of the Environment
5. Basics of Environmental Economics
6. Measures for Protecting the Environment

[Evaluation]
Attendance and Home Work Assignments
[Texts]
Lecture materials will be provided by the lecturer.

92037
Environmental Hazard and Human Behavior
Autumn Semester (1-0-0) (Every Year)
Prof. Ryuzo OHNO
[Scope]
The primary purpose of this course is to provide students with an understanding of human perception and response to the environmental disasters. The applicability of current Environment-Behavior theories to environmental policy, planning, and design is also discussed.

92052
Introduction to Time-Frequency Analysis
Autumn Semester (2-0-0) (Every Year)
Prof. Nordan HUANG (National Central University, Taiwan)
[Scope]
This course introduce a technique for time-frequency analysis. Especially, the Hilbert spectrum, which is obtained through Hilbert-Huang transform (HHT) developed by Prof. Huang, is lectured. For this class, MatLab system is required for the homework.

92085
Advanced Topics in Steel and Composite Structures
Autumn Semester (2-0-0) (Every Year)
Prof. Kazuhiko KASAI, Prof. Shojiro MOTOYUI, and Assistant Prof. Troy A. MORGAN
[Scope and Outline]
This course addresses several advanced topics in the design and behavior of steel and composite structures. The student is expected to have taken introductory coursework in structural analysis and design of steel structures. This course is organized to provide students with in-depth understanding of the behavior of steel and composite structures under various classes of gravity and lateral loading.
Additionally, design methods to achieve target performance objectives under gravity, vibration, wind, and seismic conditions are presented.
Topics include the design and behavior of:

1. Noncompact steel plate girders
2. Steel members subjected to torsion
3. Composite steel floor systems
4. Shear, semi-rigid and moment connections
5. Steel and composite lateral systems

98003
Advanced Environmental and Engineering Geoexploration
Autumn Semester (2-0-0) (Every Year)
Prof. Hiroakii YAMANAKA
[Scope]
Geoexploration and geophysical-environmental analysis of the subsurface structure is studied in order to understand the relationship between human society/life and environment/disaster issues such as earthquake disaster, ground water contamination, and underground resources.

98027
Earthquake Resistant Limit State Design for Building Structures
Autumn Semester (2-0-0) (Odd Years)
Assoc. Prof. Satoshi YAMADA
[Scope and outline]
Earthquake Resistant Limit State Design is a design method based on a balance of input energy by the earthquake and energy absorption capacity of building structures. In this lecture, the basic theory of design method based on a balance of the energy and the evaluation method of earthquake resistant performance of the building structures based on the deformation capacity of members are explained.

1. Basic theory of the design method based on a balance of the energy
2. Earthquake input evaluated as the energy input
3. Hysteresis behavior of the steel material
4. Ultimate behavior of steel members under cyclic load
5. Energy absorption capacity of steel members
6. Damage evaluation of the structure
7. Damage distribution in the multi-story structure
8. The relationship between deformation capacity of members and deformation capacity of the frame
9. Estimation method of the required earthquake resistance
10. Energy spectrum of earthquake
11. Outline of the base isolated building structure
12. Design of the base isolated building structure

98049
Structural Experiments
Autumn Semester (1-0-0) (Every Year)
Prof. Shizuo HAYASHI, Prof. Kazuhiko KASAI,
Assoc. Prof. Hiroyasu SAKATA, Assoc. Prof. Satoshi YAMADA
The performance of a structure could not be known if an actual earthquake does not occur. Since big earthquake will happen only once in several hundreds years in a city, we cannot know a true performance of the structures under a big earthquake. It is very useful in designing a new structure or knowing the performance of existing structures to conduct structural experiments. Topics dealt in this course include:

1. Introduction to experiments
2. Size of test specimens and scale effects
3. Loading system and supporting system of test specimens
4. Measurements of strain, deformation and acceleration
5. Static loading tests
6. Dynamic loading tests

62038
Geotechnical Earthquake Engineering
Spring Semester (2-0-0) (Every Year)
Prof. Kohji TOKIMATSU
[Outline]

1. Introduction to Geotechnical Earthquake Engineering
2. Seismic Geotechnical Hazards
3. Laboratory and In-Situ Tests for Determining Dynamic Soil Properties
4. Dynamic Soil Properties and Modelling
5. Wave Propagation
6. Ground Response Analysis and Local Site Effects
7. Liquefaction
8. Soil Improvement for Remediation of Seismic Hazards
9. Dynamic Earth Pressure Problem
10. Dynamic Soil-Pile-Structure Interaction
11. Seismic Design of Pile Foundations

62051
Applied Building Structural Design
Autumn Semester (2-0-0) (Even Years)
Prof. Toru TAKEUCHI
[Scope and outline]
This course discusses up-to-date structural technologies in the field of spatial structures and seismic response controlled structures into practical building design. The topic includes methodology collaborating with architects and past experience of structural failures. Homework provides detailed design experience using such technologies using practical Japanese design standards and their supporting theories.

1. Architectural design and structural design
2. Design of spatial structures
3. Seismic design and retrofit
4. Design of base-isolated structures
5. Design of response controlled buildings

62056
Structural Planning in Architecture
Spring Semester (1-0-0) (Odd Years)
Prof. Toru TAKEUCHI
[Scope and outline]
This course provides the basic knowledge of the structural design for architectural students. The topic includes the information of the latest developments in structural engineering including technologies in the field of spatial structures and seismic design.

1. Structural planning for architects
2. Characteristics of structural systems and materials
3. Latest technologies of spatial structures
4. Latest technologies of seismic design

61049
Geo-Environmental Engineering
Spring Semester (2-0-0) (Every Year)
Assoc. Prof. Jiro Takemura
[Aims and Scope]
Various aspects on soil contamination and waste disposal system, i.e., laws, fundamental theories and technologies, will be explained.
[Outline]

1. Introduction
2. Characteristics of ground water and geochemistry
3. Ground contamination (I) - mechanism
4. Ground contamination (II) -- physical laws
5. Non-aqueous phase liquid
6. Remediation: requirement and laws
7. Remediation technology:
8. Waste disposal: landfill facility
9. Offshore landfill
10. Monitoring and prediction methods
11. Simulation of contaminant process
12. Site visits

[Evaluation] Attendance, Assignments, Examination
[Texts] Handouts will be provided by the lectures.
[Prerequisites] None

61061
Physical Modelling in Geotechnics
Autumn Semester (2-0-0) (Every Year)
Assoc. Prof. Jiro TAKEMURA and Akihoro TAKAHASHI
[Aims and Scope]
This course covers scaling laws and modeling considerations for physical modeling in geotechnical problems both for static and dynamic conditions with laboratory exercises.
[Outline]

1. Introduction + visit TIT geotechnical centrifuge facilities
2. Similitude and modeling principles
3. Design of physical model and model ground preparation
4. Modeling exercise -1: preparation of dry sand model ground
5. Measurements strategy and sensors.
6. Modeling exercise -2: Modeling of liquefaction in 1 G field
7. Modeling exercise -2: continue
8. Recent developments in physical modeling - foundation
9. Recent development in physical modeling - excavation
10. Recent development in physical modeling - dynamic problems
11. Modeling exercise -3: Response of a single pile in sand during earthquake in a centrifuge
12. Modeling exercise -3: continue
13. Resent development in physical modeling - cold regions’ problem
14. Examination and interview

[Evaluation] Assignments, Exercise, Examination
[Texts] Handouts on each topic will be provided by lecture.
[Prerequisites] None

61014
Advanced Mathematical Methods for Infrastructure and Transportation Planning
Spring Semester (2-0-0) (Odd Years)
Assoc. Prof. Daisuke FUKUDA
[Aims]
Mathematical methodologies for infrastructure, transportation and city planning will be lectured. These include: (1) Advanced statistical techniques for transportation data analysis, (2) Econometric methods for travel demand forecasting, and (3) Mathematical optimization techniques for project evaluation.
[Outline]

1. Introduction
2. Overview of Systems Analysis
3. Fundamentals of Mathematical Optimization Problem
   (Optimization with equality constraints)
4. Advanced Topics of Mathematical Optimization Problem
   (Optimization with inequality constraints and Dynamic programming)
5. Fundamentals of Statistical Regression Analysis
   (Multiple regression analysis)
6. Advanced Topics of Statistical Regression Analysis
   (Simultaneous equation system, Time-series analysis)
7. Fundamentals of Discrete Choice Model
   (Derivation and Estimation of Logit Model)
8. Advanced Topics of Discrete Choice Model
   (Demand Forecasting, Extended Discrete Choice Models)

[Evaluation] Attendance, Home Work Assignments and Examination
[Text] Lecture materials will be provided by the lecturer.

61081
Transportation Network Analysis
Autumn Semester (2-0-0) (Even Years)
Prof. Yasuo ASAKURA
[Aims and Scope]
Mathematical formulation and solution algorithms for User Equilibrium models in transportation networks are described based on the nonlinear optimization framework. A variety of UE models are introduced including deterministic UE model with fixed OD demand and stochastic UE model with variable OD demand. Possible applications of those models to transportation planning are also discussed.
[Outline]

1. Roles of transportation network analysis
2. Nonlinear optimization theory
3. Solution algorithms
4. User Equilibrium model with fixed OD demand
5. User Equilibrium model with variable OD demand
6. Stochastic User Equilibrium
7. Application of UE models

61066
Transportation Economics
Autumn Semester (1-0-0) (Even Years)
Assoc. Prof. Daisuke FUKUDA
[Aims and Scope]
This course is designed to introduce graduate students with engineering background a solid grounding in the economic analysis of transportation.
[Outline]

1. Consumer behavior theory
2. Theory of the firm
3. Transportation costs
4. Congestion pricing: Theory
5. Congestion pricing: Practice
6. Benefit-Cost Analysis of Transport Facilities

[Evaluation]
Attendance and Home Work Assignments
[Texts]
Lecture materials will be provided by the lecturer.

92047
Theory of Regional Planning Process
Spring Semester (2-0-0) (Even Years)
Prof. Tetsuo YAI
[Aims and scope]
The systems of Regional Planning and Transportation Planning are studied in this class. To achieve the goal, first we learn about the systems of those planning in Europe, USA and Japan, second we study on the fundamental principle of planning procedures and institutions. Then, we discuss on the citizen participatory process for those planning fields. This class will cover some parts of administrative court systems and strategic environmental assessment in other countries. Planning practices will be discussed during the class.
[Outline]

1. Overview
2. National and Regional Planning systems in Japan
3. Planning systems in Europe and USA
4. Fundamental theory of planning procedure
5. Public Involvement process
6. Administrative court system
7. Planning and SEA

61034
Stability Problems in Geotechnical Engineering
Autumn Semester (2-0-0) (Every Year)
Assoc. Prof. Akihiro TAKAHASHI, Assoc. Prof. Jiro TAKEMURA and Prof. Masaki KITAZUME
[Aims and Scope]
The lecture focuses on various approaches to stability problems in geotechnical engineering, including limit equilibrium method, limit analysis and slip line method. The lecture also covers soil-structure interaction problems, seismic stability problems and recent ground improvement methods for increasing the stability of the structures.
[Outline]

1. Introduction
2. Stability analysis
   1) limit equilibrium
   2) limit analysis
   3) slip line method
3. Soil-Structure Interaction problems
   1) pile-soil interaction
   2) braced wall excavation
4. Underground construction
5. Soil improvements & reinforcement
6. Design philosophy and design code

[Evaluation] Attendance, Assignments and Examination
[Texts] Handouts will be provided by the lectures.
[Prerequisites] None

70008
Advanced Geotechnical Engineering
Autumn Semester (2-0-0) (Odd Years)
Assoc. Prof. Thirapong PIPATPONGSA
[Aims and scope]
The course aims to provide the theoretical framework and backgrounds of advanced geomechanics consisting of basic theories of stress-strain-strength relations of geomaterial, formulation of the rate constitutive models, numerical analyses and computational techniques. Basic to advanced Engineering examples will be introduced throughout the study to create logics of application in International Development Engineering practice.
[Outline]

1. Mathematical foundation
2. Elasticity and plasticity
3. Yield and hardening functions
4. Failure criteria
5. Strength anisotropy
6. Constitutive laws
7. Stiffness moduli
8. Parameter determinations
9. Numerical analyses
10. Application in engineering practice

[Evaluation]
Apart from mid-term and final examinations, students are evaluated regularly through a series of homework assignments which expected students to show their abilities to interpret mathematical notations appeared in the theory into numerical procedures and application.
[Text] Teaching materials are distributed.
[Prerequisites] None

61038
Mechanics of Geomaterials
Spring Semester (2-0-0) (Every Year)
Prof. Masaki KITAZUME and Associate Prof. Thirapong PIPATPONGSA
[Aims and Scope]
Explain mechanical behaviour of various geomaterials
[Outline]

1. Behaviour of grains and packing of granular materials
2. Stress space and failure criteria
3. Micro-scopic view of geo-materials
4. Sampling and disturbance
5. Behaviour of naturally deposit soils
6. Behaviour of improved geo-materials
7. Behaviour of reinforced geo-materials
8. Time dependent behaviour of geo-materials
9. Constitutive equations

[Evaluation] Assignments, Examination, Interview
[Texts] Handouts on each topic will be provided by lectures.
[Prerequisites] None

61041
Seismic Design of Urban Infrastructures
Spring Semester (2-0-0) (Odd Years)
Professor Kazuhiko KAWASHIMA
[Aims and Scopes]
Enhancing seismic performance of urban infrastructures is essential to mitigate loss of function of urban areas during and after a significant earthquake. Seismic design of urban infrastructures is an important part of securing the seismic performance of urban infrastructures. Emphasis of this lecture will be placed on the seismic design of transportation facilities including bridges and underground structures in soft soil deposits.
[Outline]

1. Damage of urban infrastructures in past earthquakes
2. Engineering characterization of ground motions (1)
3. Engineering characterization of ground motions (2)
4. Dynamic response analysis of bridges
5. Strength and ductility of reinforced concrete members (1)
6. Strength and ductility of reinforced concrete members (2)
7. Strength and ductility of reinforced concrete members (3)
8. Seismic response of bridges (1)
9. Seismic response of bridges (2)
10. Seismic design (1)
11. Seismic design (2)
12. Performance-based seismic design
13. Evaluations of seismic vulnerability
14. Seismic retrofit

[Evaluation] Report and Examination
[Text] Original texts are provided by the lecturer. They can be downloaded from HP.
[Prerequisites] Require basic knowledge on structural analysis and dynamics of structure

61060
Seismic Response Modification of Urban Infrastructures
Autumn Semester (2-0-0) (Even Years)
Professor Kazuhiko KAWASHIMA
[Aims and Scopes]
A variety of seismic response modification technologies are effectively used to mitigate damage of urban infrastructures during a significant earthquake. Isolation of underground structures from the surrounding soft soils is often used to mitigate the response. Various damper technologies are used in not only standard bridges but also long-span bridges. Pocking isolation is attracting increased interest. Emphasis of the lecture will be places on the seismic design of transportation facilities including bridges and underground structures in soft soil deposits.
[Outline]

1. Demand of seismic response modification based on past damage
2. Response modification using viscous damper
3. Period shift in using seismic isolation
4. Effect of inelastic response of columns in seismic isolation
5. Effective of poundings
6. Design practice of isolator and dampers
7. Design practice of seismic isolation
8. Implementation of seismic isolation
9. Technical development in seismic isolation
10. Seismic response modification of superstructures
11. Rocking isolation
12. Application of seismic isolation to seismic retrofit
13. Isolation to underground structures

[Evaluation] Report and Examination
[Texts] Original texts are provided by the lecturer. They can be downloaded from HP.
[Prerequisites] Require basic knowledge on structural analysis and dynamics of structures.

70043
Advanced Concrete Technology
Autumn Semester (2-0-0) (Every Years)
Prof. Nobuaki OTSUKI
[Aims and Scopes]
Lectures on the state of the art of concrete technology will be presented, including some topics related to developing countries.
[Outline]

1. Introduction
2. Cementitious materials−past, present and future
3. Structure of hardened concrete
4. Strength
5. Cements (1)
6. Cements (2)
7. Admixtures (1)
8. Admixtures (2)
9. Aggregates
10. Light weight Aggregates
11. Flowable concrete, including anti-washout concrete
12. Pre-stressed concrete
13. Durability
14. Maintenance

[Evaluation] By examination
[Texts] Ref. Concrete, Prentice Hall
[Prerequisites] None, however, basic knowledge of undergraduate level may be necessary

61003
Mechanics of Structural Concrete
Spring Semester (2-0-0) (Odd Years)
Prof. Junichiro NIWA
[Aims and Scopes]
Fundamental mechanical behaviors of structural concrete will be explained.
Some concepts for the limit state design method will also be given.
[Outline]

1. Introduction
2. Structural Design Concept of Concrete Structures
3. Ultimate Limit States
   3.1 Flexural Capacity of RC Members
   3.2 Capacity of RC Members Subjected to Combined Flexural Moment and Axial Force
   3.3 Shear Capacity of RC Members
   3.4 Application of Fracture Mechanics
   3.5 Size Effect in Diagonal Tension Strength
   3.6 Lattice Model Analysis
   3.7 Torsion Capacity of RC Members
4. Serviceability Limit State
5. Fatigue Limit States
6. Special Topics

[Evaluation] Attendance, Reports and Examination
[Text] Lecture notes will be provided by the lecturer.
[Prerequisites] None

70041
Utilization of Resources and Wastes for Environment
Autumn Semester (2-0-0) (Every Year)
Prof. Nobuaki OTSUKI, Prof. Kiyohiko NAKASAKI and Assoc. Prof. Ryuichi EGASHIRA
[Aim]
In order to achieve “sustainability” in our society, we have maximized resources productivity (product generated per unit resources) in industrial activities and minimized material/energy load (wastes) to the environment. In addition, wastes have been reused and recycled properly, even if wastes are generated. This lecture provides several examples of such industrial processes and technologies as above which effectually utilize resources and wastes.
[Outline]

1. Introduction
2. Bio-refinery (1)
3. Bio-refinery (2)
4. Solid waste treatment (1)
5. Solid waste treatment (2)
6. Outline of waste utilization in construction industry
7. Slags from steel and other metal manufacturers
8. Waste utilization in cement manufacturers
9. Researches in this field
10. Petroleum Refinery (1)
11. Petroleum Refinery (2)
12. Water Treatment (1)
13. Water Treatment (2)
14. Summary

61005
Fracture Control Design of Steel Structures
Autumn Semester (2-0-0) (Odd Years)
Prof. Chitoshi MIKI
[Aims]
Damage cases in steel structures are categorized and the control design concepts for fracture are lectured.
[Outline]

1. Classification of Fracture Modes if Steel Structures
2. Damage Cases I Steel Structures during Earthquakes
3. Fundamental Concepts of Fracture Mechanics
4. Fracture Toughness of Steels
5. Predominant Factors of Brittle Fracture
6. Fatigue Strength of Structural Elements
7. Nominal Stress Based Fatigue Design
8. Structural Stress Based Fatigue Design
9. Quality Control of Structural Elements
10. Fatigue Strength Improvement Methods
11. Maintenance of Steel Bridges
12. Characteristics and Prevention of Brittle Fracture during Earthquakes
13. Lessons learned from Failure
14. Discussions: Case Studies

[Evaluation] 5 Reports (50%), Examinations (50%)

77019
Analysis of Vibration and Elastic Wave
Spring Semester (2-0-0) (Odd Years)
Prof. Sohichi HIROSE
[Aims]
Theories of vibration and elastodynamic waves will be introduced and some engineering applications are presented.
[Outline]

1. Theory of wave and vibration for one dimensional problem
   1-1. Fundamental equations
   1-2. Reflection and transmission
   1-3. Dispersive waves
   1-4. Fundamental solutions and integral formulation
2. Theory of elastodynamics
   2-1. Fundamental equations
   2-2. Reflection and transmission of plane waves
   2-3. Surface waves
   2-4. Fundamental solutions and Green’s functions
   2-5. Integral representation of elastic waves
   2-6. Numerical analysis of elastic waves
3. Engineering applications of wave and vibration
   3-1. Application in seismic engineering
   3-2. Application in nondestructive testing

[Evaluation] Report (20%) and Examination (80%)

61059
Retrofit Engineering for Urban Infrastructures
Autumn Semester (2-0-0) (Even Years)
Prof. Chitoshi MIKI
[Aims]
Maintenance problems in urban infrastructures including damage cases, repair/retrofitting methods, and health evaluation are presented.
[Outline]

1. Recent Problems in Urban Infrastructures
2. Classification and Causes of Deterioration of Infrastructures
3. Life Cycle Cost Evaluation
4. Strategy of Health and Damage Assessment of Existing Structures
5. Inspection and Measurements
6. Application and Recent Problems of Nondestructive Evaluations
7. Health Monitoring Systems with Sensors for Damage Detection
8. Evaluation of Actual Strengths of Existing Structures
9. Ultimate Strengths of Deteriorated Structural Elements
10. Retrofitting of Corroded Structural Elements
11. Seismic Retrofitting of Deteriorated Structural Elements
12. Fatigue Retrofitting of Deteriorated Structural Elements
13. Strengths of Repaired Structural Elements and Structures
14. Discussion: Case Studies

[Evaluation] 5 Reports (50%), Examination (50%)

61065
Introduction to Solid Mechanics
Spring Semester (2-0-0) (Every Year)
Assoc. Prof. Anil C. WIJEYEWICKREMA
[Aims]
The course is designed for the students to attain the following four objectives:

(1) Understand index notation used in equations in any subject area.
(2) Understand the fundamentals of stresses and strains.
(3) Obtain a good knowledge of linear elasticity.
(4) To be able to formulate and solve basic problems in solid mechanics.

[Outline]

1. Mathematical preliminaries -- Index notation
2. Mathematical preliminaries -- Vectors and Cartesian tensors
3. Mathematical preliminaries - Eigen-value problems, vector and tensor calculus
4. Stress and strain - Stresses, traction and equilibrium equations
5. Stress and strain - Principal stress and maximum shear stress
6. Stress and strain - Strain tensor
7. Stress and strain - Cylindrical polar coordinates
8. Stress and strain - Spherical coordinates
9. Linear elasticity? Hooke’s law
10. Linear elasticity? Introduction to anisotropic elasticity
11. Elastostatic plane problems - Classification of two-dimensional elasticity problems
12. Elastostatic plane problems - Airy stress functions
13. Elastostatic plane problems - Infinite plate problem and Kirsch solution
14. Elastostatic plane problems - Infinite plane with a uniform body force in a circular region
15. Elastostatic plane problems - Hertz solution

[Evaluation] Homework - 20%, Quizzes - 20% and Final Exam - 60%
[Texts] Timoshenko, S. P. and Goodier, J. N., 1970, “Theory of Elasticity”, 3rd edition, Mc-Graw-Hill, New York / Barber, J. R., 2002, “Elasticity”, 2nd edition, Kluwer, Dordrecht.
[Prerequisites] None

61048
Advanced Course on Elasticity Theory
Autumn Semester (2-0-0) (Every Year)
Assoc. Prof. Anil C. WIJEYEWICKREMA
[Aims and Scope]
Non-linear elastic behavior is studied in detail. Anisotropic elasticity will also be introduced.
[Outline]

1. Finite Elastic Deformations -- Mathematical preliminaries (Cartesian tensors)
2. Finite Elastic Deformations -- Mathematical preliminaries (Tensor algebra)
3. Finite Elastic Deformations -- Kinematics (Configurations and motions)
4. Finite Elastic Deformations -- Kinematics (Deformation gradient and deformation of volume and surface elements)
5. Finite Elastic Deformations -- Kinematics (Strain, stretch, extension and shear)
6. Finite Elastic Deformations -- Kinematics (Geometrical interpretation of the deformation)
7. Analysis of motion -- Deformation and strain rates
8. Balance laws
9. Stress tensors -- Cauchy stress tensor
10. Stress tensors -- Nominal stress tensor
11. Conjugate stress analysis
12. Constitutive laws
13. Anisotropic Elasticity -- Linear anisotropic elasticity
14. Anisotropic Elasticity -- Lekhnitskii formalism
15. Anisotropic Elasticity -- Stroh formalism

[Evaluation] Home Work Assignments and Examination
[Texts] Holzapfel, G. A., 2001, “Nonlinear solid mechanics”, John Wiley, Chichester.
Ogden, R. W., 1984, “Non-linear elastic deformations”, Ellis Horwood, Chichester, also published by Dover publications, New York in 1997. Ting, T. C. T., 1996, “Anisotropic elasticity”, Oxford University Press, New York.
[Prerequisites] Students should have previously followed a course on Fundamentals of Elasticity or Introduction to Solid Mechanics.

61046
Principles of Construction Management
Autumn Semester (2-0-0) (Odd Years)
Assoc. Prof. Atsushi HASEGAWA
[Aims and Scopes]
Considering international construction projects, elements of construction/project management will be lectured focusing on basic knowledge/skills/methodology, such as scheduling, cost management, risk management, bid, contract, legal issues, and project cash flow.
[Outline]

1. Course Introduction/ General Flow and Scheme of Construction Project (1)
2. General Flow and Scheme of Construction Project (2), - Bid/Contract (1)
3. Bid/Contract (2)
4. Time Management (1)
5. Time Management (2)
6. Cost Management (1)
7. Cost Management (2)
8. Estimation
9. Project Funding / Cash Flow
10. Special Topics on Management (1), - Client Management -
11. Risk Management
12. Legal Issue, Claim (1)
13. Legal Issue, Claim (2)
14. Special Topics on Management (2), - Project Case - / Course Closure

[Evaluation]
Final Report (50%) + Exercise (30%) + Participation (20%)
[Text] “Construction Management” by Daniel Halpin/ “A Guide to the Project Management Body of Knowledge” by PMI
[Prerequisites] None

61047
Probabilistic Concepts in Engineering Design
Autumn Semester (2-0-0) (Odd Years)
Prof. Chitoshi MIKI
[Amis and scope]
This course enhances fundamental understandings on probabilistic approach for engineering design. Engineers must make an optimal decision with unknown or uncertain parameters. For the purpose of smart, reasonable and reliable design, this course provides quite important materials.
This course aims 1)to develop profound learning about reliability and safety on structural design and 2)to understand designing methods invoking probabilistic approach.
[Outline]

1. Introduction
2. Role of probability in Engineering Design
3. Design and Decision Making Under Uncertainty
4. Basic probability Concepts
5. Analytical Models of Random Phenomena
6. Functions of Random Variables
7. Estimating Parameters form Observations
8. Empirical Determination of Distribution Models
9. Decision Analysis
10. Statistics of Extremes
11. Reliability and Reliability Based Design

[Text]
Probability Concepts in Engineering Planning and Design Volume 1 and Volume 2, A.H. Ang and W.H. Tang
John Wiley &smp; Sons
[Prerequisites] None

61013
Civil Engineering Analysis
Autumn Semester (2-0-0) (Odd Years)
Prof. Sohichi HIROSE
[Aims]
Lecture on fundamentals of forward and inverse analyses of initial and boundary value problems in civil engineering
[Outline]

1. Introduction – forward and inverse problems
2. Variational method 1
3. Variational method 2
4. Variational method 3
5. Weighted residual method
6. Finite element method 1
7. Finite element method 2
8. Boundary element method 1
9. Boundary element method 2
10. Numerical implementation
11. Linearized inverse problems
12. Generalized inverse matrix
13. Instability and regularization of inverse problems

[Evaluation] Report (20%) and Examination (80%)

61054
Advanced Topics in Civil Engineering I
Spring Semester (2-0-0) (Every Year)
Unfixed: Visiting Professor
[Aims and Scope]
The advanced topic is given by a visiting professor in English.

61055
Advanced Topics in Civil Engineering II
Autumn Semester (2-0-0) (Every Year)
Assoc. Prof. Oliver C. SAAVEDRA V.
[Aims and Scope]
This lecture covers topics related to hydrological modeling, water resources engineering and management. It introduces physically-based hydrological models as a tool for water assessment and decision support. Actually, the required input data to these models is reviewed. These include advanced on-site observations, remote sensing sources handled by Geographical Information Systems. Optimization techniques in water management are also introduced. Then, water management experiences from different regions of the world are reviewed. Finally, the concepts of integrated water management are updated. Discussion among students about given topics is expected.
[Outline]

1. The water cycle and its main processes
2. Physically-based hydrological models
3. Monitoring of hydro-meteorology
4. Remote sensing data in Hydrology
5. GIS in Water Resources and Environment
6. Usage of optimization algorithms in water management
7. Structural Flood control in South East Asia
8. Non-structural Flood control in South East Asia
9. Nile River water resources, Egypt
10. Water scarcity in La Plata basin, South America
11. Water uses and withdraws in the USA
12. Water for Hydropower generation
13. Management concepts in water
14. Integrated water resources experiences

61062
Advanced Technical Communication Skills: ATC I
Spring Semester (1-1-0) (Every Year)
Prof. David B. Stewart
[Aims and Scope]
In this roundtable seminar we intend to identity and improve skills in academic writing (i.e., those used for technical journals) and also to improve oral presentation techniques, assisted by Power Point or similar media.
[Outline]
The basic approach to technical writing in the fields of engineering and the sciences is unified. It can be learned through content analysis and close attention to style. Each journal has its own house requirements. Still, the structure of all peer-reviewed research follows what is referred to as IMRaD: Introduction, Methods, Results, and Discussion. You describe (1) what you did and (2) why you did it; then you tell (3) how you did it and (4) what you found out. Finally, you must explain clearly what all this means for your readers.

You will learn to be clear and logical in approach and to write from the point of view of a prospective reader. This is not a translation course. On the contrary, you will be encouraged to think and write in English.
In presentation, you’ll be requested to speak so that you can be heard and also to make your visual materials uniform and consistent, as well as attractive, effective, and persuasive.

All this takes hard work and for some students may at first feel unfamiliar. To achieve your aims, you must take risks, make mistakes, and then start again. To do this, we must meet twice a week on a regular basis and you will spend a certain amount of time outside class in preparation.

61063
Advanced Technical Communication Skills: ATC II
Autumn Semester (1-1-0) (Every Year)
Prof. David B. Stewart
[Aims and Scope]
In this roundtable seminar we intend to identity and improve skills in academic writing (i.e., those used for technical journals) as well as to improve oral presentation techniques, assisted by Power Point or similar media.
[Outline]
This seminar is a continuation of ATC 1. (NOTE: new students are accepted in both terms.)

Requirements are identical and students are will proceed at their own pace within the context of what the group achieves. Students themselves, as well as the instructor, will provide constructive criticism and overall support for everyone’s work.

Class meeting times are the same as in the spring term, and regular attendance is both compulsory and vital to your success.

61071
International Collaboration I
Spring Semester (0-1-0) (Every Year)
Prof. Junichiro NIWA, Prof. Hideki KAJI and Prof. Hiroaki YAMANAKA
[Aims and scope]
Through collaborative works on earthquake hazard prediction and mitigation for the home countries of the student and discussions on the related issues, such as the strategy of urban earthquake disaster prevention, the student will foster the ability of international communication, negotiation, collaboration, and leadership.

61072
International Collaboration II
Autumn Semester (0-1-0) (Every Year)
Prof. Junichiro NIWA and Prof. Hideki KAJI
[Aims and scope]
Through collaborative works on the project evaluation related to earthquake hazard prevention for the specific region and discussions on the related issues, the student will foster the ability of international communication, negotiation, collaboration, and leadership.

61077
International Internship I
Spring Semester (0-1-0) (Every Year)
Prof. Junichiro NIWA
[Aims and scope]
Enrolled students are required to visit a foreign country to have the experience on the site visit, field work, investigation, and make a report with students of the counterpart university under the supervision of Professors. Finally, enrolled students are required to make the presentation of their report through the collaboration.

61078
International Internship II
Autumn Semester (0-1-0) (Every Year)
Prof. Junichiro NIWA
[Aims and scope]
Enrolled students are required to visit a foreign country to have the experience on the site visit, field work, investigation, and make a report with students of the counterpart university under the supervision of Professors. Finally, enrolled students are required to make the presentation of their report through the collaboration.

92041, 92042
Internship in Urban Earthquake Engineering I-II  (0-0-2)
92050, 92051
Built Environment Off-Campus Project I or II  (0-0-4)
62511, 62512
Off-Campus Project in Architectural Design I-II  (0-4-0)
61511, 61512
Civil Engineering Off-Campus Project I or II  (0-4-0)
77511, 77512
Mechanical and Environmental Informatics Off-Campus Project I-II  (0-1-3)
for Doctor Degree
[Aims and scope]
The student will take part in an actual project done by an institution or private company internationally or domestically. Project period is from three to six months. Through this internship projects the student will experience the actual practice in her/his own field and have proper prospects of her/his future profession.

92601 - 92604
Built Environment Laboratory I-IV  (0-0-1)
62751 - 62754
Building Engineering Laboratory I-IV  (0-0-1)
61711 - 61714
Special Experiments of Civil Engineering I-IV  (0-0-1)
77711 - 77712
Special Experiments of Mechanical and Environmental Informatics I, II  (0-0-1)
For Master Degree
[Aims and scope]
Experiments, exercises and field works on topics relating to each field.

77602
Mechanical and Environmental Informatics Project  (0-1-2)
For Master Degree

77721
Mechanical and Environmental Informatics Practice  (0-1-1)

92701 - 92704
Seminar in Built Environment I-IV  (0-1-0)
98701 - 98704
Seminar in Environmental Science Technology, and Engineering I-IV  (0-2-0)
62701 - 62704
Seminar in Architecture and Building Engineering I-IV  (0-1-0)
61701 - 61704
Seminar of Civil Engineering I-IV  (0-1-0)
77701 - 77704
Seminar in Mechanical and Environmental Informatics I-IV  (0-1-0)
for Master Degree
[Aims and scope]
Colloquium on topics relating to each study filed by means of reading research papers and books, and discussion with each supervisor and the program coordinators.

92801 - 92806
Seminar in Built Environment V-X  (0-2-0)
98801 - 98806
Seminar in Environmental Science Technology, and Engineering V-X  (0-2-0)
62801 - 62806
Seminar in Architecture and Building Engineering V-X  (0-2-0)
61801 - 61806
Seminar of Civil Engineering V-X  (0-2-0)
77801 - 77806
Seminar in Mechanical and Environmental Informatics V-X  (0-2-0)
for Doctor Degree
[Aims and scope]
All are offered for Master degree holders. Advanced and high level researches including colloquium, practice and experiment are required.